subject
Engineering, 30.11.2019 05:40 kyleighott

10-28 using compare instructions, write a program that uses a single timer to turn pilot lights 1 through 8 on in sequence at 1-second intervals. when all eight lights are on, they are then turned off from 8 to 1 in sequence at 1-second intervals. the pattern is repeated as long as the on/off switch is closed. use the l/o simulator screen and the following addresses to simulate the program: on/off switch_1: 1/0 pl1 o: 2/0 pl2 0: 2/1 pl3 o: 2/2 pl4 o: 2/3 . pl5 o: 2/4 pl6 o: 2/5 pl7 0: 2/6 pl8 o: 2/7 ton t4: 1

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 12:20
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 12:20
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 03.07.2019 12:20
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 03.07.2019 12:30
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
You know the right answer?
10-28 using compare instructions, write a program that uses a single timer to turn pilot lights 1 th...
Questions
Questions on the website: 6551839