 , 12.08.2019 17:20 jackferguson34

# Air enters the compressor of a simple gas turbine (fig. 1) at 100 kpa, 300 k, with a volumetric flow rate of 5 m3 /s. the compressor pressure ratio is 12 and turbine inlet temperature and exit pressure is 1700 k and 100 kpa respectively. the compressor and turbine both have isentropic efficiencies of 0.8. determine: (a) thermal efficiency of the cycle (b) back work ratio (c) net power developed in kw. assume t0 = 300 k, p0 = 100 kpa. Answers: 1

### Another question on Engineering Engineering, 03.07.2019 12:20
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2 Engineering, 03.07.2019 12:30
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1 Engineering, 03.07.2019 12:30
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1 Engineering, 03.07.2019 12:30
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
You know the right answer?
Air enters the compressor of a simple gas turbine (fig. 1) at 100 kpa, 300 k, with a volumetric flow...
Questions   Mathematics, 19.03.2018 05:47                 Questions on the website: 6713912