subject
Engineering, 02.12.2019 22:04 mrstaker1518

Environmental assessments (eas) are an important component of any civil engineering project. delgado engineering has been contracted to design and assess a multibillion-dollar urban rail center in a city, which is divided in the middle by a river. the center will be built on a previously unused island in the center of the river. for each of the four types of civil engineers (construction engineer, geotechnical engineer, structural engineer, transportation engineer), explain why they should be involved in the project—or why they would not be relevant to the project—and what their role would be. then describe how the ea would proceed, including what might be included in the environmental impact assessment process, such as the use of geographic information systems. finally, explain what might be in the environmental impact statement or why you think there may be a finding of no significant impact.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 12:20
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 12:30
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 03.07.2019 12:30
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 03.07.2019 12:30
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
You know the right answer?
Environmental assessments (eas) are an important component of any civil engineering project. delgado...
Questions
question
Mathematics, 08.01.2016 00:39
Questions on the website: 6713915